Hydro Finish Special

HYDRO FINISH SPECIAL is a protective product based on binders and beeswax in aqueous solution, combined with various additives. It is suitable for the protection of surfaces decorated with lime-based products: Marmorino, Travertino (in paste or powder), Patine Calce, Colori D'Italia and others. This product does not change the effect of the decorator being protected and is suitable for outdoor use.

Instructions for Use:

Internal use:

- Before applying HYDRO FINISH SPECIAL, make sure that the decoration to be protected is completely dry. Drying time depends on the season and temperature, but usually you should wait 4 to 6 days.
- Next, apply a single coat of HYDRO FINISH SPECIAL. If applied correctly, this will be enough to achieve an excellent result.
- HYDRO FINISH SPECIAL can be applied with a roller or brush on all decorative surfaces except PATINE CALCE; for PATINE CALCE, it is recommended to use the same brush used for PATINE CALCE and follow the same application method, in a rotating manner.

Outdoor Use:

- Tip: For all lime-based products applied outdoors, the carbonation process must occur, which usually ends after about 40 days. If HYDRO FINISH SPECIAL is applied before carbonation is complete (before 40 days), its results cannot be guaranteed. In this case, if the decorator is in contact with water (from any source, such as rain, humidity, etc.), the well-known characteristics of chalk skin may occur, including clear and dark spots or shiny bands.
- If you decide to apply HYDRO FINISH SPECIAL before the end of the carbonation process, wait from 4 to 6 days from the moment when the application of the decorator is finished. During this period, the decorator must not have contact with water from any source, such as rain, humidity, etc.