SP Craquelée

SP CRAQUELEE is a decorative product with two components (A + B) based on special resins and special pigments that create special effects of cracks on the surface. SP CRAQUELEE offers elegance thanks to its unique characteristics and can only be applied indoors, on walls, wood and furniture.

Application:
- Make sure the surface is completely dry. For intonation, make sure it has had at least 28 days to mature, depending on the temperature.
- Check that the surface is well prepared and suitable for covering: the intonation must be dry and free of granules. On old walls, make sure there are no loose or dusty paintings, and remove any paintings that are cracked.
- Apply a coat of SCIK PURAL ACRIL primer if necessary.
- Apply one or two coats of DECOR PRIMER mixed with 5-10% water, with a brush or roller.
- Apply a coat of TRASPARENTE SPACCANTE with a short-bristled brush. Let it dry well. Prepare SP CRAQUELEE:
 - Mix component B with component A and mix well. Ready to use, no need to dilute.
- Apply SP CRAQUELEE with a brush. Avoid going over the same area twice, even if the coverage is not optimal. Allow to dry for 6-12 hours, depending on temperature conditions.
- After it is completely dry, refine the surface by sanding it a little to remove any imperfections that may become visible during drying.
- Finish with a defensive finish. C´ERA D´ARTE, HYDROFINISH OPACO and SCUDO POLIURETANICO are compatible with SP CRAQUELEE.